Last Update:
If you are searching for the 14 Inch Metal Cutting Blade, you need to read this article to choose the finest ones that we prepared 14 Inch Metal Cutting Blade Reviews for you. It was very difficult to shortlist the ideal 14 Inch Metal Cutting Blade from thousands of available products. However, we tried to make sure that you get only the Best 14 Inch Metal Cutting Blade from our suggestions. Check our listings-:
| No | Product | Score | Action |
|---|---|---|---|
| 1 | DEWALT Cutting Wheel for Chop Saw | 9.8 | View On Amazon |
| 2 | DEWALT 14-Inch Metal Cutting Blade | 9.8 | View On Amazon |
| 3 | WEN BL1466 14-Inch 66-Tooth Carbide-Tipped Professional Metal Saw Blade for Mild Steel Cutting | 9.6 | View On Amazon |
| 4 | Makita A-93859-5 14-Inch Cut-Off Wheel | 9.6 | View On Amazon |
| 5 | Evolution Power Tools 14BLADEST Steel Cutting Saw Blade | 9.4 | View On Amazon |
| 6 | Freud D1490CF 14" x 90 Tooth Steel Demon Thin Metal Cutting Saw Blade | 9.2 | View On Amazon |
| 7 | Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade | 8.8 | View On Amazon |
| 8 | MK Morse - 101318 CSM1466NSC Metal Devil NXT Circular Saw Blade 14-Inch Diameter | 8.8 | View On Amazon |
| 9 | Evolution RAGE355BLADE- 14” Multi-Material Blade | 8.6 | View On Amazon |
| 10 | IRWIN 14-Inch Circular Saw Blade | 8.6 | View On Amazon |
Comparison Chart for Best 14 Inch Metal Cutting Blade
Content Summary
When we started our study, we discovered a variety of reviews. We took user comments into considerations while developing the 14 Inch Metal Cutting Blade, and in this post, we have selected just the best among them.
Saw Blades Buying Guide
Saw Blade Essentials: There are specialized blades for cutting laminates, melamine, plywood, plastics, and crosscutting lumber. Combination blades are designed to scrape and cut.
They are also suitable for crosscutting and ripping wood, making multiple cuts in a single pass.) The number and angle of the teeth, gullet size, and tooth configuration determine what a blade does best. General-purpose knives are designed to cut plywood, laminated wood, and melamine.
Number Of Teeth: A blade with many teeth will cut smoother than a blade with fewer. A rip blade with thirty or more teeth is thin and designed to remove the material with the grain as it travels quickly.
An edge should have a more extensive cutting profile that can be used for crosscutting lumber and ripping its lengthwise grain. A ripping knife is not designed to yield a sharp horizontal cut; however, a good ripping knife will move through hardwood with minimal effort and leave a clean cut with few visible scores.
A crosscut blade is a type of blade that produces smooth cuts across the grain of the wood. It has fewer teeth, but each tooth rips up less material than other blades.
The cutting action of a crosscut blade also moves the stock, resulting in more cuts and a smoother surface. This top-quality tool will yield consistent results and an attractive, polished finish.
Gullet: The space surrounding each tooth, which removes large chips, is often made in front of your workplace. This is because chip removal operations occur much faster, and thus the gullet (gap) must be made wider to allow for its increased volume.
All teeth on a crosscutting blade are smaller and fewer. This can be problematic for the saw’s feeding mechanism. Crosscuts are longer than the width of a single set of teeth, and ripping can be limited to the depth of one blade.
The large teeth within the gullets, between groups of teeth, help clear out material in the “rip” phase of wood cutting. The smaller teeth in between the groups of teeth stop feeding too much in the “crosscut” phase.
Blade Tooth Configuration: How the teeth on a saw blade are shaped and grouped is key to how well the edge will be able to cut. The configuration of the saw’s teeth can either rip, crosscut or laminate.
Understanding why you need a saw blade
Flat-Top (FT): A flat top tooth is the most efficient blade for cutting and raking material. Wood is much less likely to break when torn away with the grain, and ripping blades tear through fabric quickly, saving time from precious materials.
Alternate Top Bevel (ATB): With an alternate between right and left angles, the steel teeth help to pull wood fibers apart, making a softer cut. The saw is better at cutting natural wood, including plywood. With their beveled teeth, kitchen shears make a cleaner cut than other scissors.
Combination Tooth (Comb): Crosscutting tools have teeth formed into five rows – with four ATB teeth and one FT – with a large gullet between these sets of teeth.
Triple Chip Grind: Its teeth can cut through hard materials such as laminates, MDF, and plastics. TCG configurations are seen with a flat “raking” tooth opposite a high “trapeze” tooth. These configurations are also used for non-ferrous metal cutting blades.
High Alternate Top Bevel (Hi-ATB): The Hi-ATB configuration helps cut material surfaced with melamine, an easy-to-break material. The additional high bevel angle translates into a kerf action that grabs more of the material’s surface.
Hook Angle: Blade angle has an essential effect on cutting performance. Five degrees to the left of the regular blade angle will create an aggressive cut and feed rate.
Recalling a low or negative blade angle means slow performance but will also make the blade stay steady in the material.
A high hook angle object is usually a blade on a table saw, whereas a low or negative angle requires material to be dangerous. Radial arm saws and similar tools require blades with specific blade angles.
Kerf Width: When considering materials for your saw blades, you must consider the suitable lens type and the kerf size. Full-kerf blades are typically manufactured for wood cutting and sawing.
A powerful motor is required to power it; thin-kerf blades only cut through 1/8″ to make them more practical for woodworking tools with lower power requirements.
A thinner kerf blade allows for a smoother cut on portable and contractor models. Because less material is removed, the edges require less power to operate, allowing these saws to cut materials easily without slowing down.
(This causes excessive friction, slowing the blade, causing it to heat up, and potentially deforming it.) A traditional sheet metal blade, thinner and more flexible, vibrates more than a thicker blade with fewer flex points.
Technological advancements in blade design have made the two-piece thin kerf blades rival industrial quality full kerf saw blades.
Thin-kerf blades, like the ones used with vibrating systems, compensate for the loss of stability and make them the most efficient choice for lower-powered saws.
Saw Blade Teeth Quality: Two types of saw blades are high-quality and lower quality. Higher-quality blades are thicker with carbide cutting teeth fused to the blade plate, while lower-quality cutters use thin steel teeth that need to be replaced when they wear away from heavy use.
One of the features of some of the best knives is that the carbide material on them is specifically designed for a particular blade, and it is attached using a three-metal brazing process.
When a layer of copper alloy between layers of silver, the knife provides extra flexibility and impact resistance, an excellent quality knife with C3 grade micro-grain carbide teeth also allows for many sharpening reactions.
1. DEWALT Cutting Wheel for Chop Saw
- High-performance aluminum oxide grain for long life and fast cutting
- High grain concentration for aggressive cutting action and smoother running wheels
- A proprietary material mix ensures durable long-life wheels
- 2 full sheets of fiberglass for durability and safety
2. DEWALT 14-Inch Metal Cutting Blade
- The metal cutting blade has a 50% longer life
- Precise tip placement for longer life and accurate cuts
- A stiff plate design minimizes run-out and extends the life
3. WEN BL1466 14-Inch 66-Tooth Carbide-Tipped Professional Metal Saw Blade for Mild Steel Cutting
- Featuring a 14-inch diameter (355 mm), a 1-inch arbor (25.4 mm), and a rating of up to 1450 RPM
- Perfect for dry-cutting through steel and metal, including pipes, tubes, angle iron, and other ferrous metals.
- Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts
- Designed with 66 carbide-tipped teeth for general-purpose mild steel cutting
- Compatible with 14-inch dry-cut metal saws, chop saws, and circular saws
4. Makita A-93859-5 14-Inch Cut-Off Wheel
- 14-Inch diameter by 1/8-Inch thick, 1-Inch arbor Cut-off Wheel
- A36P B.F. General purpose 5 pack
- Aluminum oxide
- Cuts Ferrous metals, Steel, angle iron, brass, bronze, carbon steel, and other metals
- Consistent performance with long life
5. Evolution Power Tools 14BLADEST Steel Cutting Saw Blade
- Evolution saw blades are designed to deliver maximum performance by using the highest grade Carbide, Hardened blade Bodies, and ultra high-grade brazing techniques.
- All offer premium quality
- Designed to increase performance..-Note: Designed for use with Evolution saws or other low RPM saws.
- 1600 RPM
- 66 Carbide Teeth, .094-Inch Kerf
- 1-Inch Arbor Size
6. Freud D1490CF 14″ x 90 Tooth Steel Demon Thin Metal Cutting Saw Blade
- Cermet teeth provide high heat tolerance and increased hardness for superior wear and impact resistance; lasting up to 5x longer than standard Carbide.
- Improved laser cut Stabilizer vents trap noise and vibration for maximum stability, keeping the blade cool with accurate cuts in metal cutting applications.
- Triple chip tooth provides fewer sparks, a burr-free finish, and longer life
7. Diablo D1472CF 14-inch Steel Demon 72T Cermet II Carbide Ferrous Metal Saw Blade
- Cermet Blend Teeth for cutting metal withstands impact, reduces wear, and lasts up to 3X longer than standard carbide.
- Improved Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping it cool and accurate in metal cutting applications.
- Triple Chip Metal Cutting Grind is designed to maximize life, speed, and durability, giving burr-free cuts in metal cutting applications.
- Tri-Metal Shock Resistant Brazing a three-metal brazing system that allows metal cutting carbide tips to withstand extreme impact for maximum durability.
- Spark free Cold Cutting blades are “Hot work” compliant saving you the time and hassle of obtaining a Hot Work permit for job sites (Check local laws).
8. MK Morse – 101318 CSM1466NSC Metal Devil NXT Circular Saw Blade 14-Inch Diameter
- Power source type: Manual
- Package Weight: 3.85 pounds
- Included components: CIRC BLADE 14″ 66T NXT STEEL
- Model No: CSM1466NSC
9. Evolution RAGE355BLADE- 14” Multi-Material Blade
- Replacement blade
- Cuts wood, steel, aluminum, and plastic
- Use with Rage2 14″ multipurpose Chop saw and Evosaw380 15″ steel cutting Chop saw
- Cuts through steel, aluminum, wood, and plastic
- No coolant required
- Produce virtually no heat, burrs, or sparks
- Cuts through steel, aluminum, wood, and plastic
- No coolant required
- Produce virtually no heat, burrs, or sparks
10. IRWIN 14-Inch Circular Saw Blade
- Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts
- Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life
- Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch.
- The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower.
