Best Corded Right Angle Drill In 2022 – Buying Guide

Last Update:

You can count on our expertise Corded Right Angle Drill Reviews. Since we have spent considerable time examining and evaluating a large number of reviews for Corded Right Angle Drill and assigning scores to them.

It was challenging to narrow the selection to 10 Corded Right Angle Drill where they are available in numbers. I hope this information assists you in making a final choice on Best Corded Right Angle Drill.

Best Corded Right Angle Drill
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
1Right Angle Drill, 1/2 In9.8View On Amazon
2BOSCH PS11-102 12-Volt Lithium-Ion Max 3/8-Inch Right Angle Drill/Driver Kit with (1) High Capacity Battery and Charger9.8View On Amazon
3Makita DA3010F 3/8" Angle Drill9.6View On Amazon
4Right Angle Drill, 1/2 In9.4View On Amazon
5Makita AD04R1 12V max CXT Right Angle Drill Kit9.2View On Amazon
6Makita AD03R1 12V max CXT Right Angle Drill Kit9View On Amazon
7Makita DA4000LR 1/2" Angle Drill8.8View On Amazon
8DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1)8.4View On Amazon
9NEIKO 10529A 3/8" Close Quarter Angle Power Drill - 55-Degree Angle - Variable Speed (0-1400 RPM) - 120 Volt8.2View On Amazon
10DEWALT 20V MAX* Right Angle Drill8.2View On Amazon

Comparison Chart for Best Corded Right Angle Drill

Our expert completed a research before doing any recommendations for the Corded Right Angle Drill throughout this article.

1. Right Angle Drill

  • Comes with a chuck
  • 13 amp motor delivers power for drilling holes of all sizes
  • Two operating speeds: max 1750 rpm-inch high, clutch-inch low gear range
  • 90-degree left to right Roto-Lok handle offers maximum operating comfort
  • Removable side handle offers added control
  • Impact resistant carrying case-included

2. BOSCH PS11-102 12-Volt Lithium-Ion Max 3/8-Inch Right Angle Drill/Driver Kit with (1) High Capacity Battery and Charger

  • POWER: A 12V motor provides 1,300 RPM as well as 115 in-lbs.
  • VERSATILE: The 5-position pivoting head articulates from 90-degrees to 180-degrees, making it the perfect drill driver combo for working in tight areas.
  • CONVENIENT: The 3 8-Inch auto lock chuck allows for simple bit replacements and a variety of applications including anything from driving 3 inch screws, drilling a pilot hole, or using a 3 4 inch spade bit.
  • VARIABLE SPEED: The PS11-102 utilizes a variable-peed trigger for perfect speed regulation.
  • PRECISION: Comes standard with a motor brake for exact serial screw driving and Bosch’s Electronic Cell Protection to ensure longer battery life and run time.

3. Makita DA3010F 3/8″ Angle Drill

  • Powerful 4.0 AMP motor with less weight (3.5 lbs.)
  • Variable speed (0 – 2,400 RPM) for drilling in a wide variety of materials
  • Compact design (10-5/8″ long and 2-5/8″ head width) for use when working between framing studs and other close quarter applications.
  • Paddle switch with speed limiting dial to prevent over-tightening of fasteners
  • Built-in clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds.

4. Right Angle Drill

  • Power Tools and Accessories
  • Country of manufacture: China
  • Manufacturer: Milwaukee
  • Powerful 7-amp motor
  • Use with up to 4-5/8-inch selfeed bits
  • Trigger speed control
  • Head and handle swivel 360 degrees for easy drilling in tough spots
  • Limited warranty, 30-day no-risk trial

5. Makita AD04R1 12V max CXT Right Angle Drill Kit

  • Makita-built motor delivers up to 245 in.Lbs. Of max torque
  • Variable speed (0-1, 100 RPM) for a wide range of drilling and driving applications
  • Compact and ergonomic design at only 12-3/8″ long
  • Weighs only 2.7 lbs. With battery for reduced operator fatigue
  • Ergonomic barrel grip design for added comfort

6. Makita AD03R1 12V max CXT Right Angle Drill Kit

  • Makita-built motor delivers up to 245 in.Lbs. Of max torque
  • Variable speed (0-1, 100 RPM) for a wide range of drilling and driving applications
  • 3/8″ Keyed metal chuck for improved bit gripping power
  • Compact 2-1/2″ angle head height for use in close quarters
  • Compact and ergonomic design at only 12-3/8″ long

7. Makita DA4000LR 1/2″ Angle Drill

  • Powerful 7.5 AMP motor for improved performance
  • 2-Speed (0 – 400 & 0 – 900 RPM) for increased drilling versatility
  • Ergonomically designed rubberized grip for comfort
  • All-ball bearing construction for longer tool life and smooth operation
  • Large multi-position side handle for operator comfort and control

8. DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1)

  • The right angle drill features dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications.
  • Compact front to back length (4.0-inch) allowing users to fit into hard to reach spaces
  • Multi-grip trigger of DEWALT angle drill provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger.
  • 3/8-inch ratcheting chuck with Deep Hex Pocket allows 2-inch (50 mm) hex bit to be fully inserted for getting into tight spaces.

9. NEIKO 10529A 3/8″ Close Quarter Angle Power Drill - 55-Degree Angle - Variable Speed (0-1400 RPM) - 120 Volt

  • CLOSE QUARTER]: This close quarter power drill has a 55-degree angle head that allows the drill to reach into places other drills can’t go and has a 3/8-inch keyed bit holder chuck for easy bit replacement to fit with a variety of applications with an included chuck key.
  • ERGONOMICS]: Ergonomically designed paddle trigger and pistol grip is designed for precise drilling and RPM control and utilizes a grip that is slightly textured to prevent slips and increase accuracy and efficiency.
  • VERSATILE]: The variable speed ranges from 0 to 1400 RPM for precision drilling in tight spaces with a forward/reverse switch that allows for easy directional changes to make fast work for home improvement jobs and more.
  • APPLICATION]: Drill is suitable for use on wood, composition materials, plastics, masonry, metal, and screws to be the perfect companion to the drill bits in your tool collection.
  • SPECIFICATIONS]: Power Supply: 120V ~ 60Hz, Motor Power: 3.8 Amps, ETL approved.

10. DEWALT 20V MAX* Right Angle Drill

  • Dual speed ranges (0-650/0-2000) rpm for increased user flexibility providing a wide range of applications.
  • Compact front to back length (4.0″) allowing users to fit into hard to reach spaces
  • Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces while still having access to the trigger.
  • 3/8″ ratcheting chuck with deep hex pocket allows 2″ (50 mm) hex bit to be fully inserted for getting into tight spaces.

Corded Right Angle Drill Buying Guide

Choosing the correct Corded Right Angle Drill is not simple. Has your mind been spinning between purchasing options?

Corded Right Angle Drill in general, and more particularly, which model to choose? If this is the case, be easy that you are not alone.

Individuals frequently struggle to find the ideal Corded Right Angle Drill for their own. We get the stress that comes with the purchase decision!

Since your presence here, you are clearly interested in Corded Right Angle Drill Reviews.

You've been overwhelmed with information, and you need to find a trusted source that offers solid alternatives before making any conclusions about which product is ideal for your requirements.

Several sources for such information are buying guides or rating websites, word-of-mouth recommendations from friends or family members, online forums where people discuss their own experiences, product reviews available across the internet, and YouTube channels.

Only thorough research can guarantee that you are purchasing a suitable product. However, this is not always simple.

That is why we have compiled a list of the best Corded Right Angle Drill in today's market, on your side, so that you will have no more concerns.

You may be wondering how we came up with the list. How did we come up with this purchasing guide?
  • To begin, our algorithms gathered as much information on these items as possible from reputable sources.
  • We analyzed all collected information using a large volume of data.
  • Then, using industry-standard criteria, our experts graded them according to their quality-to-price ratio, allowing us to choose the best Corded Right Angle Drill now at the moment, available!
The products are not randomly picked. We analyze several factors before compiling a list. Several of the requirements are described in further detail below-

Corded vs. Cordless: The two primary power supply options for right-angle drills are corded and cordless.

Understanding them in depth will assist you in selecting the appropriate model as required.

Corded: These drills operate on a continuous 120V supply from a regular electrical socket. While these devices are strong and less priced, they are not as handy as cordless models.

If there is no nearby electrical outlet, they may need an extension cable.

The amps indicate the size of the motor. They provide greater power but cannot be utilized on many worksites without access to a power source.

Cordless:: These drills are powered by a rechargeable lithium-ion battery and are essentially portable.

It enables freedom and convenience in the workplace by eliminating a cable or electrical outlet. The motor's voltage is utilized to determine its power.

While they lack the power of corded tools, they are more maneuverable and may be utilized in several task areas.

A corded model is an excellent choice for do-it-yourselfers or professionals with a dedicated workshop.

At the same time, a cordless model is ideal for individuals who must operate in regions without access to electricity or in areas that are difficult to reach.

Chuck Dimensions: The chuck secures the drill bit in place and is typically 3/8-inches in diameter, a common size for around 80% of drills.

Bear in mind that a 3/8-inch chuck may accommodate a significantly bigger bit, dependent on the shank size.

A 3/8-inch chuck may typically accommodate a bit up to 3/4-inch in diameter. For professional work, a chuck size of up to 1/2-inch is required. As with a 3/8-inch chuck, the 1/2-inch chuck is used to attach/secure a much bigger bit than its assessed size.

However, it requires more torque to drive a bigger drill bit. In general, bigger bits need more torque than smaller bits, which implies that cordless versions' batteries deplete quicker, while corded electric models use more power.

Speed of the motor: The motor speed specifies the rate at which a tool can drill holes or drive screws in, and consequently, the maximum torque that a drill may create.

However, speed is not synonymous with torque since a motor with a higher speed is more powerful and can create more torque.

As a result, it expedites the completion of your task. The rotational speed is expressed in revolutions per minute (RPM), mostly dependent on the power source (corded or cordless).

A cordless 18-volt right angle drill has a maximum speed of 1500 revolutions per minute, whereas a 20-volt drill has roughly 2000 revolutions per minute.

Corded versions are more powerful and have more access to electricity, which results in higher RPMs. For instance, a corded 4-amp drill will spin at 2400 revolutions per minute.

Speed and torque adjustment: Torque and speed are inversely proportional. The higher the speed (RPMs) of a tool, the lower the torque.

The majority of drills include variable speed settings, which allow you to choose whether you need more RPMs or torque depending on your job circumstances.

Torque is critical to consider when encountering resistance when operating the drill. Thus, if the drill is used on thick materials such as concrete or stonework, greater torque is necessary rather than increased speed.

Increased RPMs (speed) is necessary to drill swiftly through softer materials or drive screws in less dense or rocky areas.

Drilling softwoods like pine requires less speed (RPMs), but drilling hardwoods like balsa requires higher speed.

Most current drill models have a switch, knob, or lever that allows you to direct power to either speed or torque.

Apart from these modifications, the drill has a pressure-sensitive trigger that increases speed in response to how firmly you push the trigger and produces greater torque in response to how lightly you press the trigger.

Life of the Battery: Consider the battery life when selecting cordless right-angle drills. When evaluating the battery's life, you should look at the charging time (how long it takes to charge)

The runtime (how long it takes to charge), the runtime (how long the battery maintains a charge before needing to be recharged), and the battery's lifespan (how long it works before replaced).

Most batteries for this sort of drill last three hours on a single charge when used intermittently and require three hours to recharge.

Lithium-ion batteries have a life expectancy of around 300–500 charging cycles, or three years before they lose their capacity to retain a charge.

As a result, they endure less time, indicating that the battery has reached the end of its useful life. A drill with a brushless motor will provide greater power and efficiency, which is ideal for extending the life of your battery.

Convenience and Grip: The operator should maintain a solid grasp of the right-angle drill with one hand while operating in confined locations.

However, its ergonomically curved handles with rubberized grips provide a secure grip during drilling.

Certain versions have removable side handles that allow the user to impart more leverage to the drill with the other hand.

Few manufacturers even have paddle-style triggers down the length of the handle on their drills. They give the user more control over the drill speed by changing the trigger pressure.

Clutch: It resembles an adjustable dial or knob with numbers at the drill's end (before the chuck). These parameters indicate the maximum amount of resistance that a drill can withstand/accept before disengaging.

It preserves the motor in excellent operating order and avoids stripping the screws if set correctly. This component is intended to aid the user in drilling just to the point required.

If you are an experienced user or expert, you will understand properly evaluating the drill's depth and pressure.

  • Type of Chuck: Chucks are classified into four broad categories: SDS, hex, keyed, and keyless, with keyless being the most prevalent kind for most current drills.

    Hex Drills:: They are less frequent than other varieties because they only hold screwdriver bits. As a result, a hex chuck cannot be used to drill holes with a drill bit.

    SDS Chucks:: They are designed for use with hammer drills and are seldom seen in other kinds of drills, such as right-angle drills. Both keyed and keyless chucks allow you to drill holes and drive screws.

    Here, the keyed chuck requires you to tighten it with a key. While changing bits with a keyed chuck takes a little longer, they are more secure and robust.

    Keyless Chucks:: These are a more handy solution since they allow for fast switching of bit types and sizes.

    However, you hold the chuck housing — the component that will not move – and use the trigger to adjust the chuck and change the bit. This chuck style will not provide a secure grip and will soon wear out over time.

    Dimensions: The weight and size of the right-angle drill dictate its ease of use and functionality. It is critical to examine the size of the drill since a right-angle drill is intended to fit into narrow spaces.

    The width of most right-angle drill heads is between 3 and 4 inches, which allows them to fit into areas where regular power drills cannot.

    Weight: : This drill should be lightweight and readily controlled with one hand. As a result, most drills have a length of around 12 inches or less and weigh between 3 and 5 pounds.

    Heavyweight drills are quite difficult to manage. When using a drill for an extended period, choose a lightweight and short drill.

    While cordless models are more portable and easy to use since they do not need a cable, they are also heavier to take about due to the battery's weight.

    Choice: : The tiny right-angle drill makes working in tight locations a breeze. Put, choosing a smaller drill means sacrificing power choices.

    Choosing the tiniest right-angle drill is not always the best choice since they lack the endurance and power necessary to withstand demanding labor in any industrial situation.

    These are the factors upon which we have based our selection on Corded Right Angle Drill. Is it the end of our procedure?

    No, sir! The most crucial thing you should know about us is that we are always upgrading our website to ensure that we provide updated and accurate information.

    Because reader pleasure is important, we have added a last layer of screening. That'd be you, the reader!
  • Hello. You've come to the right place if you want to learn more about power drills and how to make your home improvement projects go quicker and easier. I'm Jacob P., the founder and content writer of Anyone who needs assistance with a project or has a query about how something works (or doesn't) can count on me to share my expertise.