If you are searching for the Industrial Air Compressor, you need to read this article to choose the finest ones that we prepared Industrial Air Compressor Reviews for you. It was very difficult to shortlist the ideal Industrial Air Compressor from thousands of available products. However, we tried to make sure that you get only the Best Industrial Air Compressor from our suggestions. Check our listings-:

No | Product | Score | Action |
---|---|---|---|
1 | Industrial Air IV5076055 60 gallon 5 hp Two Stage Air Compressor | 9.8 | View On Amazon |
2 | HPDMC 10HP Rotary Screw Air Compressor Spin-on Oil Separator [email protected] 208-230Volt | 9.8 | View On Amazon |
3 | California Air Tools 2010ALFC Ultra Quiet | 9.6 | View On Amazon |
4 | 8 Pieces Air Blow Tools Adjustable Air Nozzle Blow Tool Air Compressor Flow Nozzle Air Compressor Accessories for Industrial Household Air Blow Compressor | 9.6 | View On Amazon |
5 | Quincy QT-54 Splash Lubricated Reciprocating Air Compressor - 5 HP | 9.4 | View On Amazon |
6 | Industrial Air ILA1683066 30-Gallon Cast Iron Oil Lube Air Compressor | 9.4 | View On Amazon |
7 | Flexzilla Portable Air Compressor with Quiet Technology | 8.6 | View On Amazon |
8 | DeWalt DXCMV5076055 60 gallon 5 hp Two Stage Air Compressor | 8.6 | View On Amazon |
9 | 3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES | 8.4 | View On Amazon |
10 | DEWALT DXCMV5048055 Two-Stage Cast Iron Industrial Air Compressor | 8.4 | View On Amazon |
Comparison Chart for Best Industrial Air Compressor
For you, we've searched through a massive number of reviews. If you're on the search for the Industrial Air Compressor then maybe this review articles can prove beneficial.
1. Industrial Air IV5076055 60 gallon 5 hp Two Stage Air Compressor
- Industrial performance delivers maximum CFM @ 175 PSI; provides enough power to operate more than one air tool or Device at one time.
- Low pump RPM for longer life
- Patented Pump Design Provides for a Cooler Running Pump
- Electric motor with thermal overload protection
- Large capacity, 60 gallon ASME* air receiver with large 3/4” air outlet port
- Equipped with tank pressure gauge and on/off switch
- Wire form belt guard improves compressor cooling
- Four tie down holes in platform for ease in transporting
- Shipped with synthetic blend air compressor oil for optimum performance and long life
- 15.3 SCFM @ 100 PSI, 13.5 SCFM @ 175 PSI
2. HPDMC 10HP Rotary Screw Air Compressor Spin-on Oil Separator [email protected] 208-230Volt
- Parameters】 Power: 10HP;208-230-Volt, 60Hz, 3- Phase;Working Pressure : Max 125 psi /8 bar;Air Flow : 39cfm;Motor RPM : 3600.
- Simple installation】HPDMC compressors are equipped with easy-to-use, robust and intelligent microprocessor controllers, long-lasting and efficient transfer system,is the leading rotary screw compressor for industrial applications.
- Stable and Durable】Spin-on Air Oil Separator is an integrated separator with element and its own housing.
- Service ability】 Service-friendly design implemented using a layout that provides instant access to all consumable items, with quick-release and hinged protective covers and easy-to-use controllers minimizes downtime and reduces maintenance costs.
- Application】 It can widely used for production, pharmaceutical, textile, auto repair, aviation, metallurgical and other industrial fields, can used safely in all applications of small and medium sized businesses.
3. California Air Tools 2010ALFC Ultra Quiet
- Ultra Quiet – Only 60 decibels
- Oil-Free Pump – Cleaner air for better tool operation; Less Maintenance and Costs; Use in Cold Temperatures.
- 4.00 CFM at 40 PSI & 3.00 CFM at 90 PSI; Max 125 PSI
- The MP100LF motor/pump is tested for a minimum life of 4000 hours before wear; At least 30% longer than other brands.
- 110V 60 Hz – 7.6 Amps – 2.0 Gal. Aluminum Tank – 35 lbs
- Ultra Quiet – Only 60 decibels
- Oil-Free Pump – Cleaner air for better tool operation; Less Maintenance and Costs; Use in Cold Temperatures.
- 4.00 CFM at 40 PSI & 3.00 CFM at 90 PSI; Max 125 PSI
- The MP100LF motor/pump is tested for a minimum life of 4000 hours before wear; At least 30% longer than other brands.
- 110V 60 Hz – 7.6 Amps – 2.0 Gal. Aluminum Tank – 35 lbs.
4. 8 Pieces Air Blow Tools Adjustable Air Nozzle Blow Tool Air Compressor Flow Nozzle Air Compressor Accessories for Industrial Household Air Blow Compressor
- The package includes: you will get 8 pieces of air blow tools, which can blow away hard-to-reach dirt and debris and bring you a lot of convenience.
- Reliable quality: air nozzle blow tools are made of alloy, which are stable to prevent rust and corrosion so that you can keep them for a long time, and also fit in the palm of many people’s hand.
- Special design: air compressor tools have special design of internal pressurization structure and conical airflow nozzle to offer powerful airflow, which also provide large capacity and strong blowing to help you easily clean the dust.
- Safe and portable: air compressor flow nozzle tools have mar-resistant rubber tips and safety tips to avoid scratching paint or other fine surfaces and also easy to carry out anywhere you want.
- Wide application: air blow tools can be applied in blowing dust, blowing water, blowing powder, blowing sundries and various industrial or household cleaning and blowing operations, which are easy to handle the dirt on the surface of hard-to-reach cracks, crevices, equipment, tools, truck beds, etc.
5. Quincy QT-54 Splash Lubricated Reciprocating Air Compressor – 5 HP
- Industrial-duty US-made Baldor motor
- Capacitor start motor with built-in thermal overload
- Less than 5 PPM oil carry-over (blow-by) rating
- 145-175 working PSI
- Pump RPM: 1310
6. Industrial Air ILA1683066 30-Gallon Cast Iron Oil Lube Air Compressor
- Heavy duty induction motor for maximum performance and efficiency
- 155 PSI max pressure for optimum tool performance
- 30 gal. tank with pneumatic tires for maximum portability
- Dual voltage motor is wired for standard 120 volt outlet, and may also be converted for 240 volt applications.
- Fully assembled and equipped with quick-set regulator, tank and working pressure gauges, quick connect air outlet and on/off switch for ease of use.
7. Flexzilla Portable Air Compressor with Quiet Technology
- Quiet Technology – Flexzilla Air Compressors are the quietest on the market, emitting operating noise no louder than a normal conversation.
- Industrial Grade Pump – Premium components and copper windings that outlast aluminum, Low RPM twin cylinder pump, Oil-Free Pump – Reduces maintenance.
- Front mounted controls
- 2 HP, 20 Gal., 5.8 CFM @ 90 PSI, 125 Max. PSI
- Includes: Two quick-connect universal brass couplers, pressure regulator and gauge, tank pressure gauge manual tank drain, 8 in.
- Color: ZillaGreen
8. DeWalt DXCMV5076055 60 gallon 5 hp Two Stage Air Compressor
- Industrial performance delivers maximum CFM @ 175 PSI; provides enough power to operate more than one air tool or Device at one time.
- Patented Pump design provides for a cooler Running Pump: industrial style air intake filter; easily Accessible Oil level sight glass and Oil drain with 4” extension; low Pump RPM.
- Electric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required.
- Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps
- Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling.
9. 3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES
- 1/2″ NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1.
- 175 PSI MAX INPUT.
- STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR.
- STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.
- STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS.
10. DEWALT DXCMV5048055 Two-Stage Cast Iron Industrial Air Compressor
- The DEWALT 2 stage air compressor is built with a 5-HP TOPS motor to provide long life and quiet operation, Air Compressor Voltage: 230.
- The integrated control panel has a tank and pressure gauge and 2 quick-connects for convenient control, Air Delivery SCFM @ 175PSI (CFM): 17.
- This compressor delivers plenty of air to run multiple tools at the same time to get the job done faster, Air Delivery SCFM @ 100PSI (CFM): 17.
- The thermal overload protection system motor protects the motor from voltage fluctuations, Nozzle Fitting Size: 3/4-in, Horsepower: 5.
- This air compressor comes from the factory with synthetic blended oil already installed, Height (Inches): 80, Length (Inches): 31.
- Built to perform with a patented pump design that provides longer life by running cooler, Pump Type: Oil-lubricated.
- 2 Year Limited Pump Warranty