Best Spot Weld Drill Bit Reviews & Buying Guide

Last Update:

If you are looking for the best spot weld drill bit, you should read this article to learn how to choose the best ones from the many available.

We have compiled Spot Weld Drill Bit Reviews to help you pick the best ones from several options.

Best Spot Weld Drill Bit
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
114-Pack Spot Weld Cutter Sets Double Sided9.4View On Amazon
2Spot Weld Cutter, Sheet Metal Hole Cutter9View On Amazon
3Reppkyh 15-Pack Spot Weld Cutter Sets - Double Sided 3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover for Power Drill Spot Welding9View On Amazon
4Wolfride 6mm 8mm Spot Weld Drill Bit HSS CO Spot Welding Cutter Spot Weld Removal Tool (2PCS)8.8View On Amazon
5EEEkit Rotary Spot Weld Cutter Sets Double Sided 13-pack8.8View On Amazon
6Spot Weld Cutter Set Double Sided 14 Pcs8.6View On Amazon
7NEIKO 10052A Spot Weld Drill Bit - High Speed Weld Cutter - Cobalt Steel with Titanium Coating - 8mm (5/16-Inch)8.6View On Amazon
8Spot Weld Cutter Set,13 Pcs 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool and 2 Replacement Blades8.6View On Amazon
9Drill Bit Set, 3Pcs HSS CO Cobalt Spot Weld Cutter Kit Cutting Accessories Can Separate Spot Welded Panels 1/4in 5/16in 3/8in8.4View On Amazon
1013 Pcs Spot Weld Drill Bit8.2View On Amazon

Top 10 The Best Spot Weld Drill Bit Reviews

There were a large number of user reviews available, which we analyzed to find Spot Weld Drill Bit. Surely, the ideas made by our specialists in this post will assist you in making the best option possible.

1. 14-Pack Spot Weld Cutter Sets

Steel with great temperature resistance was the ideal material. 3/8-inch diameter cutting blade and 1/4-inch diameter arbor are both used.

It is easier to separate spot-welded panels using a double-sided Rotary Cutter Blade than a Panel Cutter. Flipping the bit over on its arbor assembly is all you need to do if one side gets worn down to nothing.

Each of these blades has a spring-loaded pin in the middle to help you drill out spot welds while leaving a clean hole with no distortion to the sheet metal.

High-performance, double-sided blades. You can use it with thin metals such as stainless steel and iron sheets, aluminum, FRP, and other thin metals. When the blades wear out, it’s simple to replace them.

2. Spot Weld Cutter

Half an inch thick on both sides “High-Quality Heat Resistant Steel Rotary Metal Cutting Blade for Heavy-Duty Applications.

You can easily separate spot-welded panels without distortion. Cutting edges are sharper, and the piercing ability is improved. 3/8 of an inch “Spot Welds may be easily removed using a diameter cutting blade.

Arbor with flats to eliminate chuck spinning (fits 1/4” and bigger drills). The cutter has a long service life and is easy to use.

This bonus set contains two rotary spot drills with cutting blades, as well as an additional five blades, saving you both time and money!

Anywhere you believe it would be useful, you can use the Great Spot Weld Cutter to cut through various materials such as iron and cast iron and alloy and carbon steels and die steels and die grinders.

3. Reppkyh 15-Pack Spot Weld Cutter Sets

To avoid spinning in the chuck, You can use a 3/8″ cutting spot welds remover with most 1/4″ drills. You can use it with thin metals such as stainless steel and iron sheets, aluminum, FRP, and other thin metals.

Heat-resistant thicker steel is used to make the double-sided blade. Fast separation of spot-welded panels without deformation due to high strength and hardness.

The spring-loaded center pin of the bit is visible. When the blades wear out, it’s simple to replace them. Do not break the border by drilling quickly with minimal incision resistance.

Removes the need to pry and break welds by removing spot-welded panels or metal sheets without distorting or injuring the underlying panel.

3/8″ Cutter Drill +11 Extra 3/8″ Cutters +3 Pilot Pins are included in this Spot Weld Cutter Set.

4. Wolfride 6mm 8mm Spot Weld Drill Bit HSS CO Spot Welding Cutter

Spot weld drill bits, 6mm and 8mm, in a set of two. Made of high-strength steel cobalt (HSS Co), this product is robust and durable.

The design of the tip makes it easier to place and prevents sliding. Excellent for eliminating welding spots from metal sheets or drilling metal sheets.

Thin stainless steel sheets, copper sheets, aluminum sheets, and other thin metal sheets are suitable for this use.

5. EEEkit Rotary Spot Weld Cutter Sets Double Sided 13-pack

The bit is made of high-speed steel, which is very robust and wear-resistant. Blades have a double edge for maximum efficiency.

Steel, aluminum, and other thin metals may all be used with this product without issue. Drill bit with a spot weld cutter for separating spot-welded panels without distorting the metal sheet.

It would be best to separate spot-welded sheet metal or panel and access holes drilled. Hex Shank and a 3/8 in. double-sided rotating blade make this weld cutter ideal for cutting spot-welded panels, which may be difficult to remove with standard panel cutters.

When the blades wear out, You can easily replace them.

6. Spot Weld Cutter Set Double Sided 14 Pcs

Sharp double-sided blades constructed of heat-resistant steel. A proper tool is needed to remove a spot-welded panel or metal plate without warping the metal or injuring the panel below.

Efficient stainless steel, iron, aluminum, F.R.P., and other thin metal plates. Steel with superior heat resistance, hardness, and wear resistance is chosen.

A spring-type drill center pin The cutting blade is 3/8 inch in diameter, and the shank is 1/4 inch. A flat shank to prevent chuck rotation That drill bit can easily separate the spot welding plate without distorting it.

Cut tiny inspection holes in sheet metal, panels, etc. Also known as spotweld drill bits, spot weld cutter, spot weld drill bit, Sets of Rotary Spot Welders Power Drill Spot Welding.

1,2 Pilot Pin,11 Extra 3/8 “cutlery Remover Drill Bits Spot Weld Cutter Set, 3/8” “Drill Bits, Metal Hole Cutter Rotary Spot Weld Cutter Quality components, and excellent service.

7. NEIKO 10052A Spot Weld Drill Bit - High-Speed Weld Cutter -

Using this drill bit, it is possible to remove spot welds and resistance spots without damaging the sheet metal. High-speed steel and cobalt alloys are designed to sustain high speeds for a long time.

When utilized in high-temperature situations, titanium coating can survive high-performance metal and wood drilling.

The bottom half of the bit has a flat ground surface, which increases the chuck’s strength and grip. When used for marking, the nibbed tip of the pilot enhances precision and prevents sliding.

A standard 8mm bit with a 1-3/4″ (45mm) length is widely used for finding spot welds in automotive frames.

8. Spot Weld Cutter Set,13 Pcs 3/8″ Rotary Spot Weld Cutter

Half an inch thick on both sides “High-Quality Heat Resistant Steel Rotary Metal Cutting Blade for Heavy-Duty Applications.

3/8 of an inch “Spot Welds can be easily removed using a diameter cutting blade. Easily separate spot-welded panels with this drill bit without damaging the sheet metal.

To avoid spinning in the chuck, You can use a 3/8″ cutting spot welds remover with most 1/4” drills. You may use it with thin metals such as stainless steel and iron sheets, aluminum, FRP, and other thin metals.

There is nothing to return or replace unless our spot weld bits aren’t compatible with your spot welding drill.

9. Drill Bit Set

High tensile strength and hardness make it long-lasting in usage. These drills are stronger because of the HSS CO’s basic material.

It is possible to use standard planes and drills, but the reverse is not true. There is still a use for our drills. It is easier and faster to separate spot-welded panels without twisting metal plates.

The product can be separated by spot welding of sheet metal, panels, etc. Drill bits of 1/4in, 5/16in, and 3/8in are included to satisfy various needs.

You don’t have to worry about spot welding a second time because of its wide variety of applications, portability, and superb craftsmanship.

10. 13 Pcs Spot Weld Drill Bit

Excellent quality heat-resistant thicker steel is used to construct double-sided blades to provide high strength and durability.

Easily separate spot-welded panels with this drill bit without damaging the sheet metal. Double-sided blades eliminate the need to pry and break welds, allowing for double efficiency.

The bit’s center pin has a spring-loaded mechanism that depresses to release tension and provide direction for cutting.

3/8 of an inch “Spot welds can be easily removed using a diameter cutting blade. Rotary spot welder and 10 3/8-inch drill bits “new cutters and two extra pilot pins are included.

Buying Guide

Choosing the correct Spot Weld Drill Bit is not simple. Has your mind been spinning between purchasing options?

Spot Weld Drill Bit in general, and more particularly, which model to choose? If this is the case, be easy that you are not alone.

Individuals frequently struggle to find the ideal Spot Weld Drill Bit for their own. We get the stress that comes with the purchase decision!

Since your presence here, you are clearly interested in Spot Weld Drill Bit Reviews.

You've been overwhelmed with information, and you need to find a trusted source that offers solid alternatives before making any conclusions about which product is ideal for your requirements.

Several sources for such information are buying guides or rating websites, word-of-mouth recommendations from friends or family members, online forums where people discuss their own experiences, product reviews available across the internet, and YouTube channels.

Only thorough research can guarantee that you are purchasing a suitable product. However, this is not always simple.

That is why we have compiled a list of the best Spot Weld Drill Bit in today's market, on your side, so that you will have no more concerns.

You may be wondering how we came up with the list. How did we come up with this purchasing guide?
  • To begin, our algorithms gathered as much information on these items as possible from reputable sources.
  • We analyzed all collected information using a large volume of data.
  • Then, using industry-standard criteria, our experts graded them according to their quality-to-price ratio, allowing us to choose the best Spot Weld Drill Bit now at the moment, available!
The products are not randomly picked. We analyze several factors before compiling a list. Several of the requirements are described in further detail below-

Bit Coating Types

Second, coated bits are usually necessary when drilling through difficult materials. However, not every form of bit coating is capable of completing the operation.

Consider a coating made of stronger materials. This will protect your bit against wear and tear, such as rust or even corrosion.

Regrettably, it does not stop there. Not so simple. Certain compounds are preferred for covering drill bits made of hardened steel.

In the majority of circumstances, these materials rate higher than steel in terms of hardness and stiffness.

Bear in mind that this is the kind of coating you want on the components that will be used on hard surfaces.

As previously stated under materials,' the substances utilized to make drilling bits must be stiffer than the surface being drilled through.

This is a critical quality to check for when purchasing a drill bit from a retailer, even more so in today's competitive market.

Choose bits with TiCN or even black oxide coatings. These goods will perform admirably and last as long as you expect. And it is just what you need from your money.

Flute Design In Bits

On to the next critical feature. There are a variety of flute types available for a variety of bit applications. To begin, you must understand the significance of each category.

Generally, drill bits with unspecified flute designs are available. This implies they are capable of doing almost all common drilling jobs.

On the other hand, special-purpose flute designs are intended for a limited number of accurate drilling jobs.

Personally, after doing much study and testing, I've concluded that when choosing drill bits, there are two primary flute kinds to consider.

They are mostly of the 30-degree flute or parabolic kind. These two primary types are the most often used in drilling operations.

Additionally, you must realize that the parabolic drill flute shape is ideal for undefined applications. That is, the ideal match for drilling softer surfaces and doing other routine drilling chores.

As a result, if you're searching for a drill bit that can handle hardened steel, you should choose for one with a 30-degree flute angle.

Set Components

This may seem trivial, apparent, or superfluous, but drill bits are often offered in sets, and it is critical to understand this before making a purchase.

In most situations, the set includes drill bits in a variety of sizes and shapes. As a result, it is critical to understand the sizes required and the sort of holes you want to drill.

Additionally, the screws you want to use will dictate the set you choose. Ascertain that the package includes the correct kind of bit for your hardened steel drilling operations.

Occasionally, manufacturers would combine bits for distinct purposes into a single set. The good news is that the majority if not all, hardened steel drilling bits can be used to drill through other materials.

Additionally, the number of distinct bits included in a single set should be considered. This is because a larger number of bits in a set equates to a greater number of drilling alternatives.

In other words, having a choice of drilling bits allows you to create holes of varying shapes and sizes.

Styles Of Shanks

The shank is the end of the bit that fits into the drill. They are constantly available in a variety of designs and sizes.

This section of your drill bit is critical and difficult to choose. If you do this incorrectly, you may not even be able to insert the bit into the drill chuck.

There are two distinct shank types in terms of size. You may either have a fixed diameter shank designed for twist drills or a variable diameter shank.

These are primarily used in conjunction with automated machines. The specialty shank or threaded shank is the second kind of shank.

And, as is the case with flute designs, this one is for unique or rather specific machines.

Design Of The Bit Tip

Another critical bit characteristic is the tip design. Certain tip designs may not be ideal for certain applications, such as drilling into hardened steel.

You must appreciate the distinction in the nature of your job. Determine the kind of bit tip to use in each situation.

The most frequently used drill bit tip designs are the V-point, tapered, fishtail, Brad-point, split drill tip, and standard point. Each of these designs has a number of distinct benefits and downsides.

Additionally, the split point tip design is required for drilling through hardened steel or steel alloys. This is because it cuts at angles ranging from 118 to 135 degrees.

Bits With Tapered Ends

Our last point of contention begins with a question. Which drill bit is better for hardened steel, tapered or non-tapered?

This is a simple one and should not, under any circumstances, keep us back. Simply said, a tapered drill bit is superior for nearly all drilling applications.

This also implies that you'll adore them for steel drilling. The argument is that using tapered drill bits provides more grip.

Additionally, the resultant hole is compatible with regularly used screws. This is ideal for your overall working outcome.

That is why our team decided to include this as a factor to consider when buying drill bits.


Durability and reliability go hand to hand. A robust and durable Spot Weld Drill Bit will serve you for months and years to come.

Drill Bit Composition

Three types of drill bits are available: high-speed steel, cobalt, and carbide.

  • High-speed steel:(HHS) is a general-purpose drill bit that may be used to drill not just through ferrous metals such as iron or stainless steel, but also through nonferrous metals such as aluminum or brass.

  • Carbide: metal drilling bits are excellent for drilling nonferrous metals such as copper but struggle to bore through ferrous materials such as cast iron.

  • Cobalt: drill bits are intended for use with ferrous metals and perform poorly on nonferrous metals. Because cobalt does not rust or corrode quickly, it is ideal for drilling through strong materials such as steel.

    Bit Composition

    Before we get into the details of the materials that compose the ideal drill bit for punching holes in hardened steel, I want you to grasp something fundamental.

    That is while drilling through a surface, the drill bit should be harder than the substance being drilled.

    In other words, while drilling hardened steel, you'll need even stronger bits. The finest bits for drilling into hardened steel are made of a range of materials and metal alloys.

    Carbides, coated steel, and cobalt are just a few examples. The argument is that less durable materials can only penetrate soft surfaces such as wood and so forth.

    That is why cobalt-based compounds are the most often suggested for drilling through hardened steel.

    Additionally, they can drill easily through different types of steel and stronger materials. Therefore, while selecting the ideal bit for drilling difficult surfaces such as mild steel, tool steel, or hardened steel used in automobiles, firearms, and equipment, it is critical to consider the tool's elements.

    Additionally, ensure that the bit is capable of withstanding the heat and pressure associated with drilling holes in hardened metals and other difficult materials.

  • Frequently Asked Questions (FAQ)

  • Should I Lubricate Drill Bits?

    Yes, drill bits are protected from damage because oil/water lubricates them and cools the drill bit.

  • What Will Happen To A Drill Bit If The Operating Speed Is Too Fast?

    If drill bits get hot while drilling, they will quickly become dull.

  • Is It Better To Drill Fast Or Slow?

    To avoid overheating, it is important to use the right speed for the drill bit. The material will be chewed or torn if you move too slowly. In a hurry, you risk overheating. Drilling slowly is best for drilling through hard materials like steel or metal. At the same time, fast speed is ideal for drilling wood. Just be sure to keep your drill a bit sharp at all times.

  • Why Won’t My Drill Bit Go Through The Wood?

    This means that the drill bits were getting worn down. It's important to buy new drill bits.

  • How Do You Drill A Hole In Wood Without Splinters?

    To keep the wood from splitting, put some painter's tape over the spot where you're going to drill. Pulling the tape off after drilling is complete.

  • How can I stop drilling too deep?

    You can put painter's tape on the drill bits to measure how far they go.


    The best drill bit for you will depend on what you need. Also, the type of projects you work on has a big impact on what kind of tool you need.

    What makes this the best part is that we were able to review the best products thoroughly thanks to a little expertise and expertise. This makes it a lot easier for you to buy things.

    Also, the most important features for different jobs have been discussed. This should help you know what to look for in drill bits to buy the best Spot Weld Drill Bit.

    So, finding the right drill bit for your projects will no longer be a problem. Thanks to our handy experts.
  • Hello. You've come to the right place if you want to learn more about power drills and how to make your home improvement projects go quicker and easier. I'm Jacob P., the founder and content writer of Anyone who needs assistance with a project or has a query about how something works (or doesn't) can count on me to share my expertise.